I have been searching low and high online for a transformer or buck converter of some type to use in enclosure for a custom machinery build we are assembling that utilizes 240v and 120v (USA) and haven’t had any luck. I keep finding those types for EU external appliance usage and that’s not what we need. Rather than have this machinery require a 240v and 120v AC wall plug it would be easiest to integrate into one circuit enclosure and one 240v wall plug. I know they exist we have one here however it is for lower than required wattage/current needs we have. We need one that is rated for 2000 watts (approx 18 amps) or so, that can operate the 120v internal controls this machinery uses. If anyone has a good suggestion how to, is safe to use, and that we can integrate into our enclosure it would be appreciated.