Hi, not sure if post this here or not, @ work I make about 200 parts a year side job for me. I milled the two pockets and one slot in pinewood see in picture: now at work I used 1/2 3flt carb. End mill two passes of .200 in depth to void chipping the wood and small end mill for the groove; I would like to do this at home. I need advice before I buy something and it don't work out, looking to buy a bench-top mill (mini mill) and maybe convert it over to a cnc or cnc router my budget maybe around $1500-$2000 and what model or brand to look at
Thanks