good evening,
I am an engineer interested in cam
In our company there is a lathe with Ecs 2402 cnc. I have a problem with UPG post processor on section initial change tool.
In our Ecs system there isn't G97 command so when I use threading, cnc give an error. Only G94, G95, G96 are permitted.
I have tried to use some conditions with IF THEN ENDIF without success.
Manual suggest to use
<G!:speed_type><S!>etc...
<G!:feed_type><eol>
But always output G97

Have you some suggestions?
Thank you in advance