584,865 active members*
4,913 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    Jul 2013
    Posts
    2

    Amazon PCI Parallel Port Card That Works

    I have a SuperPid/G540 setup running Mach3 on an old Dell Optiplex GX620. Everything worked great except spindle on/off... I was having to do that manually. I assumed the issue was wiring or Mach3 configuration, since that was the only issue... bad assumption. Eventually I got around to testing the parallel port output pin voltage and it was 3.3Volts, not 5 like I read everywhere that I needed. Researching around, I couldn't find a readily available (e.g. Amazon prime) parallel port card that was known to work. So I rolled the dice on this $9 Shinestar branded card:

    https://www.amazon.com/gp/product/B079939BLV

    and it's working fine. I did install the parallel driver that came with it, disable the motherboard parallel port, set the driver for the new card to use LPT1 (LPT3 was the default), and update the card address in Mach3 ports/pins, but I gather that may be needed for any add in parallel port.

    It is a PCI (long motherboard connector) and not a PCIe (short motherboard connector) card. In my research, it seemed to me that my odds were greater at getting a 5 volt card if it was PCI rather than PCIe. Not sure if that's really true or not.

    Anyway, just FYI, and sharing info I wish I'd have come across when I was trying to sort this out.

  2. #2
    Join Date
    Jul 2013
    Posts
    2

    Re: Amazon PCI Parallel Port Card That Works

    Just came across an interesting diagram that seems to suggest you can determine 3.3Volt cards from 5 Volt cards by where the "key" (that open slot in the edge connector) is... 5 volt cards have the key towards the rear of the connector:

    https://i.stack.imgur.com/uQTmf.png

    So if you have to roll the dice on a card and can see a picture of the connector it has... I would think this would improve your odds a lot.

  3. #3
    Join Date
    Mar 2003
    Posts
    35538

    Re: Amazon PCI Parallel Port Card That Works

    PMDX sells a card that they guarantee to work with Mach3.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

Similar Threads

  1. Parallel port pci card
    By Dylwad in forum PlasmaCam
    Replies: 1
    Last Post: 08-07-2013, 02:15 PM
  2. Parallel port card??
    By skylanehku in forum Gecko Drives
    Replies: 2
    Last Post: 08-29-2012, 04:53 AM
  3. Parallel port add-in card.
    By Drools in forum Gecko Drives
    Replies: 7
    Last Post: 06-27-2012, 06:40 PM
  4. Which PCI parallel port card?
    By bead in forum CNC Machine Related Electronics
    Replies: 2
    Last Post: 07-03-2010, 07:32 PM
  5. laptop pcmcia parallel port works
    By craigtx in forum Computers / Desktops / Networking
    Replies: 0
    Last Post: 12-12-2007, 08:31 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •