I have a home built CNC plasma machine running a hypertherm 45 XP I haven't cut in pretty good but I'm having some trouble with my lead Ins And Lead outs delete out cuts no problem but it seems as if I don't have a lead in when I look at the piece after I cut. I'm running Mach 3 and sheetcam it has anybody had this problem before
Results 1 to 2 of 2
-
01-17-2018, 07:10 PM #1
Registered
- Join Date
- Jul 2017
- Posts
- 41
Wrong post processor? There is no lead in on my. Parts for plasma.
-
11-30-2018, 04:15 PM #2
Registered
- Join Date
- Apr 2003
- Posts
- 540
Re: Wrong post processor? There is no lead in on my. Parts for plasma.
Old post, but if there isn't room for the lead in or lead out then it won't cut with one... shorten the lead distance or use and arc instead etc.
Reply With QuoteSimilar Threads
-
using the wrong post processor?
By LureMin in forum SheetCamReplies: 1Last Post: 11-30-2018, 04:10 PM -
Post Processor for Mach 3 Plasma Table
By skygizmo in forum AutodeskReplies: 0Last Post: 02-23-2017, 12:21 PM -
Post Processor for mach3 plasma
By aaronky in forum Autodesk CAMReplies: 0Last Post: 01-22-2017, 09:16 AM -
post processor producing wrong code
By nigel2000 in forum EdgeCamReplies: 0Last Post: 01-29-2015, 08:05 PM -
wrong machine definition , post processor issue ??
By luckyyyyyy in forum MastercamReplies: 0Last Post: 02-10-2010, 11:10 AM
Tags for this Thread
Posting Permissions
