Forum help here appreciated....
Extract machinable features - all good (hole drill and rough + contour perimeter)
post G-code all ok (TUP 10mm CRB 4FL 2 LOC)
A. When I select TUP 6m CRB 4FL 2 LOC and post process all the tool change information disappears?
BTW i usually remove the rough feature as its not needed, but regardless if it stays or goes once the 6mm instead of the 10mm is selected - only the jobber drill remains??????????
Results 1 to 3 of 3
-
10-14-2018, 11:57 AM #1
Registered
- Join Date
- Jul 2013
- Posts
- 84
Just strange.... - Too change g-code missing
-
10-15-2018, 01:54 PM #2
Registered
- Join Date
- Jul 2013
- Posts
- 84
Re: Just strange.... - Too change g-code missing
no takers?
-
10-15-2018, 03:14 PM #3
Registered
- Join Date
- Jul 2013
- Posts
- 84
Re: Just strange.... - Too change g-code missing
Attachment 404030
does station impact - this is the only thing i see different?
Reply With QuoteSimilar Threads
-
strange error code
By joeyjrc in forum Tormach Personal CNC MillReplies: 1Last Post: 07-18-2017, 01:27 PM -
Strange code issue!
By EmeraldIsleforg in forum MilltronicsReplies: 4Last Post: 10-06-2016, 03:46 AM -
Steppers not missing but making strange sound.
By jwolin in forum DIY CNC Router Table MachinesReplies: 1Last Post: 05-15-2012, 12:39 AM -
strange hi low gear change solenoid malfunction
By bushing1 in forum Haas MillsReplies: 1Last Post: 09-02-2010, 02:19 AM -
Strange Axis problem after Ballscrew Change
By AKFALAR in forum CamSoft ProductsReplies: 4Last Post: 04-01-2009, 10:07 PM
Tags for this Thread
Posting Permissions
