Hello everyone,
Ive got a 1990 okuma LB 12, I cant get my unclamp light to come on, so I removed the draw bar cover were the sensors are and come to find out the sensor on the left only had one
wire hooked up with porly rapped electrical tape.
From the machine there is a Red 24V, Black 0V and a white, im assuming is signal, The wire on the sensor says OMRON E2E-X2E1 14317M 12-24V, Brown +V, Black out, Blue 0V. DC NO.
How do I hook this up properly.
And dont know if this maters or not but when the chuck is clamped the clamp light is on no matter where I move the sensors.
Thank you for any help. Bob