505,896 active members
2,719 visitors online
Register for free
Login
Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Mar 2008
    Posts
    13

    Error M01 in CNC 432 in MH500C

    Hi good day i am checking cnc mill MH500C with control CNC 432, i obtain the errors M01 and I01,

    If 19RSS1 = 0 , error M01 appears (checksum fault MC memory RAM)
    if 19RSS1 = 1 , screen constant appears direct, and error I01 show it (Interface has no voltage supply).

    the battery has 12.5v, and pcb CentProdMod was changed (same model of pcb for different memorys series), before a chess screen appeared.

    I intend change the constant but no change, Are these some suggestions?,
    should i change the battery, o how change the parameters?

    regards
    Renato Masias

  2. #2
    Member
    Join Date
    Mar 2008
    Posts
    13

    Re: Error M01 in CNC 432 in MH500C

    I could solve this problem, replace the batery of 6v, i put all the constant, then this almost work.

    in test obtain alarm of Drive mod3, Input Module1, CentPro. , this look like electronics error card.

    Renato

  3. #3

    Re: Error M01 in CNC 432 in MH500C

    dear friend,

    I have M01 problem too ...at MH500C after accu change….HOW DID YOU SOLVE THE PROBLEM ???
    Can you tell me

    Thanks

    Janos

  4. #4
    Member
    Join Date
    Mar 2008
    Posts
    13

    Re: Error M01 in CNC 432 in MH500C

    Replace the CENT_PROCMOD put parameters again and this started working.

  5. #5

    Re: Error M01 in CNC 432 in MH500C

    Quote Originally Posted by Renatox_ View Post
    Replace the CENT_PROCMOD put parameters again and this started working.
    Yes, I tryed...It is Ok!!

    Best Regards

    Janos

Similar Threads

  1. Maho MH500C Spindle problem
    By georgetsag in forum Deckel, Maho, Aciera, Abene Mills
    Replies: 1
    Last Post: 07-01-2016, 04:13 PM
  2. Replies: 8
    Last Post: 02-06-2015, 03:56 PM
  3. Deckel maho mh500c
    By gaherne in forum Deckel, Maho, Aciera, Abene Mills
    Replies: 0
    Last Post: 07-20-2010, 12:38 PM
  4. Philips 432 diagnostics test? (MAHO MH500C)
    By AndreasL in forum Deckel, Maho, Aciera, Abene Mills
    Replies: 3
    Last Post: 08-08-2009, 02:40 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •