[njms17000]

hello i have haas vf7 , its no working with programs make in mastercam , show alarm 178 "divide by zero" . but if i make program in mdi , machine works. i have a file with some files . i only downloaded parameter files but files .mac and files .pgm i dont know how download.

this is the readme file on backup diskete.
EADME.
Updated 18-Sep-98


This file describes the contents of the floppy disk shipped with
Haas CNC machines. The following files are included:


nnnnn.PAR The list of parameters as machine is shipped.
Where nnnnn is the serial number of your machine.


APL-B.MAC O9000 Automatic Part Loader macro rev B for vertical mills.
RP-W.MAC O9000 Horizontal mill pallet changer macro program (inches)
RP-WE.MAC O9000 Horizontal mill pallet changer macro program (millimeters)
VR-TOOL.MAC O9011 Tool vector retract macro program for VR machines


O9876.PGM O9876 Engraving program needed for rev 8 mills


QUICKLEI.PGM O9999 QuickCode program for lathes, English, inches
QUICKLEM.PGM O9999 QuickCode program for lathes, English, millimeters
QUICKMEI.PGM O9999 QuickCode program for mills, English, inches
QUICKMEM.PGM O9999 QuickCode program for mills, English, millimeters
QUICKMFI.PGM O9999 QuickCode program for mills, French, inches
QUICKMSI.PGM O9999 QuickCode program for mills, Spanish, inches


O3331.PGM O3331 Cut Flat VF-3: PALLET 1 (for Automatic Pallet Changer)
O3332.PGM O3332 Cut Flat VF-3: PALLET 2 (for Automatic Pallet Changer)
O4441.PGM O4441 Cut Flat VF-4: PALLET 1 (for Automatic Pallet Changer)
O4442.PGM O4442 Cut Flat VF-4: PALLET 2 (for Automatic Pallet Changer)

[mbservice]

sounds to me more like a problem with mastercam or communications