Hi Guys,
Some of you will know I have spent A LOT of time and energy moving into CNC, purchasing an LB15II and restoring it in my spare time and many of you have helped from the outset when I was testing machines to buy through to help with programming recently. This has been a headache and joy at the same time with plenty of mechanical knowledge between my ears but less detailed electronics.
I have had good help locally as needed but as boards started to fail as I got things moving it all became very frustrating and beyond me – In desperation I reached out overseas for help to locate and isolate the problems and get me back running economically.
I found “CNC technical services” in a google search and although they are in upstate NY and Im in Australia, decided to give them a go.
I cant speak highly enough of the service I received from them in ‘over the phone’ and online problem isolation, to board repair (sent and returned international shipping) and also buying replacement boards and parts.
They have got me up and running and got me through many further machine break downs very efficiently, professionally and timely.
Cant recommend these guys more highly.
Give credit where its due I say and Im a very happy customer (with no affiliation).
Sadly I cut the end off my finger guys so Im only running warmup programs now and then to keep the thing ‘functional’. So, till Im healed up, not much is happening.
Thanks for all your help guys.
Iain.