Just starting to run my first Daewoo lathe, I have always run Haas. My machine has a Mitsubishi Meldas 64 control. I mounted a dead length 5c collet chuck on it and can't seem to get it to switch clamp OD to ID. The book says to switch parameter 6407 bit 6 to 0/1. I have done this and cant seem to get it to change the recognized clamping direction when I try to run the spindle. Keep getting spindle unclamped status when trying to run with drawtube pushed out which is what I need with dead length chuck. The parameter bit number is changing, I know they are from right to left starting with 0 and ending with 7, and the screen shows that clearly. Need help am I missing something else??? Thanks