--------------------------------------------------------------------------------
A quick hello to the community out there, have just joined prompted by the urgent requirement for parameters !
I purchased a 1992 Mori Seiki SL-00 lathe 2 yrs ago and never switched it on. I now have a requirement for the machine and after powering it up discovered it has lost all of its parameters. Although I do have the electrical manual with the machine serial number specific parameters, they seem to be problematic. I have input them manually, but the turret will not function and the control panel is behaving oddly.
Does anybody have a similar SL-00 ? I would be very grateful to receive your parameter files ! Either to transmit them into my machine or to compare them with what I have.
Please get in touch if you can help at all !
Many thanks
ps. if i push the foot pedal which should open and close the chuck, the turret starts playing up and the chuck does nothing... if I push the coolant on/off buttons, the chuck opens and closes ! Though I would add this should anybody have had a similar problem and recognise it accordingly !