584,871 active members*
5,418 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > MadCAM > No g-code file generated by Madcam in Rhino
Results 1 to 5 of 5
  1. #1
    Join Date
    May 2009
    Posts
    22

    No g-code file generated by Madcam in Rhino

    I have encountered a problem that I am unable to resolve.
    I have attached a picture, which shows on the right the window for postprocessing and creating g-code file. No errors there and it says the location and name of the file that was created.
    But the problem is that the file is not there. In the attached picture on the left is "open" window at the folder, where the g-code file should be, but the folder is empty.

    I have tried reinstalling Rhino and Madcam and now I am totally out of ideas.
    I would appreciate any suggestion or poke in the right direction. Thanks in advance!

  2. #2
    Join Date
    Mar 2004
    Posts
    1661

    Re: No g-code file generated by Madcam in Rhino

    Can you make a test with the default 3 axis LinuxCNC post processor?
    I have a feeling that the post processor might cause an error and the error is silently thrown by the generator.

  3. #3
    Join Date
    Nov 2012
    Posts
    145

    Re: No g-code file generated by Madcam in Rhino

    Try sending it to desktop

  4. #4
    Join Date
    May 2009
    Posts
    22

    Re: No g-code file generated by Madcam in Rhino

    thanks for the suggestions! I already had tried different other postprocessors (for Mach3 etc) and also tried different output folders, but it was still the same.
    but I made progress, when I reinstalled windows... no idea, what was the cause

  5. #5
    Join Date
    Mar 2004
    Posts
    1661

    Re: No g-code file generated by Madcam in Rhino

    It was Windows then!

Similar Threads

  1. Replies: 9
    Last Post: 02-21-2014, 02:55 AM
  2. Rhino 5, MadCAM
    By rdjay in forum MadCAM
    Replies: 22
    Last Post: 03-05-2013, 10:36 PM
  3. Replies: 8
    Last Post: 12-15-2010, 09:32 PM
  4. Generate G code from rhino file
    By mredican in forum Rhino 3D
    Replies: 14
    Last Post: 02-24-2008, 12:51 AM
  5. rhino to madcam
    By daisydog in forum Rhino 3D
    Replies: 1
    Last Post: 07-31-2007, 07:15 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •