Hi - I have just acquired an Openbuild C Beam with CNC Xpro V3. The Xpro is said to be compatible with Estlcam. I have licenced copy of Estlcam. Does this mean I can use the Estlcam control software by flashing the Xpro as one would an Arduino? Would be more than pleasantly surprised if it where that simple. Any advice appreciated.
Thread: CNC Xpro V3 with Estlcam
Results 1 to 3 of 3
-
11-03-2018, 07:04 AM #1
Registered
- Join Date
- Apr 2012
- Posts
- 91
CNC Xpro V3 with Estlcam
-
11-04-2018, 07:06 AM #2
Registered
- Join Date
- Apr 2012
- Posts
- 91
Re: CNC Xpro V3 with Estlcam
Well it was that simple !!!
Worked first time. It downloaded it from the Estlcam programme automatically. The features it donates are extensive and all free. (Bearing in mind a well spent £50 for the CAM, )
I do have professional equipment, but have to say this control impresses me with it`s simplicity and ease of use.
No connection with the company. Just an impressed old cynic.
-
11-07-2018, 12:23 PM #3
Registered
- Join Date
- Apr 2012
- Posts
- 91
Re: CNC Xpro V3 with Estlcam
Except I cannot get the probe to work. Connected to the green screw terminals GND and D3. Using input 7 in Estlcam.
Any idea`s folks?
Reply With QuoteSimilar Threads
-
How to connect a DC motor to CNC xPro as spindle?
By jeffmorris in forum ArduinoReplies: 0Last Post: 01-22-2018, 02:17 AM -
Estlcam / backlash
By whakahere in forum Uncategorised CAM DiscussionReplies: 0Last Post: 07-08-2016, 10:45 AM -
CNC xPro Controller Board
By lindum in forum Want To Buy...Need help!Replies: 0Last Post: 02-04-2015, 11:09 AM
Tags for this Thread
Posting Permissions
