584,830 active members*
6,021 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > UG NX > SolidEdge CAM-Pro
Results 1 to 3 of 3
  1. #1
    Join Date
    Nov 2010
    Posts
    1

    SolidEdge CAM-Pro

    Looking at CAM Software packages. I anyone using CAM-Pro with SolidEdge? Feed back would be helpful!

  2. #2
    Join Date
    Sep 2009
    Posts
    78

    Re: SolidEdge CAM-Pro

    You might get feedback here but if you don't I recommend posting your question in the Practical Machinist CAD/CAM forum.
    NX 10.0.3

  3. #3
    Join Date
    Sep 2009
    Posts
    78

    Re: SolidEdge CAM-Pro

    It just occurred to me that is Solid Edge's product, sorry; for some reason I thought it was 3rd party software. I looked on their site and from what a video showed it looked a lot like NX cam but I couldn't tell how close it matched it. Can you get a VAR to do a demo for you? If it is any where close to NX cam it should be great cam for you. I would imagine it would be fully associative to you solid edge models too. I can't say enough about how big an advantage it is to do cad and cam in one software.
    NX 10.0.3

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •