585,996 active members*
4,632 visitors online*
Register for free
Login

Thread: Change D-offset Number

Results 1 to 2 of 2
  1. 11-07-2018, 12:03 PM #1
    CYKong
    CYKong is offline Junior Member
    Join Date
    Nov 2018
    Posts
    1

    Change D-offset Number

    Hi & Good Day,


    Normally, we set the tool number in SOLIDCAM, the D-offset number will follow the tool number.
    But I have a case that, I want set different D-offset number for same tool.

    For example: Geometry A use T1 D1; Geometry B uses T1 D31

    In MasterCAM can do this. Whether have any method can do in SOLIDCAM. Because I tried to change the D number in tool setting, but it can't work.
    Reply With Quote Reply With Quote
  2. 11-08-2018, 04:22 AM #2
    partur
    partur is offline Registered
    Join Date
    May 2013
    Posts
    37

    Re: Change D-offset Number

    You need add this feature to postprocessor..
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules