Hi.
Which 4 axis breakout board should I use, I have a choice of three.PMDX-122 from www.pmdx.com.or a C11-Multifunction CNC Board from www.cnc4pc.com . or a MC433 4axis board which can be found on ebay.There is also a MC433G which has an on board G-code processor?I have 4 stepper motors from motionking which are 34HS9803 with matching drivers 2H090MH.I would also like to run this system with software from EMC.Has anyone had any experience with any of these boards.
Eric