Hello,

I recently started having this issue of my 2013 VF2 blowing a small 250 milliamp (1/4 amp) glass fuse that is on one the boards. When this happens the machine will not power up when pressing the green power button. It happens when the machine is off and usually when it stays off for a few days. If I don't power it up for 3-4 days and than go to run it its dead and there is a small orange LED flashing in back that says blown fuse when ON. I replace the fuse and it runs fine without any signs of any issues. The machine has been moved a few months ago to a new shop. Never acted up at all in 5 years. After the move it ran ok for the first 2 months or so than it popped the fuse.

Any guidance where to look for the issue would be appreciated. Haas service came out recently and replaced the internal clock battery and did a full update to newer software. No change in, still pops the fuse at random.