585,665 active members*
3,709 visitors online*
Register for free
Login

Thread: Mist coolant output not working

Results 1 to 2 of 2
  1. 11-11-2018, 10:12 PM #1
    JWWalthall
    JWWalthall is offline Registered
    Join Date
    Apr 2004
    Posts
    38

    Mist coolant output not working

    Just installed a Fog Buster on my Dyna Mill with a Ajax(Centroid) control. I have hooked up a solenoid valve to the mist coolant output on the main board. When machine is up and running I try to actuate the mist coolant manually or through MDI(M07) and I get nothing the led on the panel does not light and I do not get a return on the screen that says mist coolant on. I have checked parameter 8 and it is set to (2) both coolant, is there something else I need to change or has anyone else had this issue. Flood coolant works fine in manual and MDI.

    Thanks !
    Reply With Quote Reply With Quote
  2. 11-11-2018, 11:31 PM #2
    cncsnw
    cncsnw is offline Registered
    Join Date
    Feb 2008
    Posts
    280

    Re: Mist coolant output not working

    It sounds like the mist coolant logic may be missing from your PLC program. Impossible to tell, though, without seeing the PLC program.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. No Fog Mist Coolant
    By Jim Dawson in forum Material Machining Solutions
    Replies: 8
    Last Post: 01-17-2017, 05:22 PM
  2. Alphacam mist coolant
    By Ron Thompson in forum Alphacam
    Replies: 1
    Last Post: 05-19-2015, 08:01 PM
  3. MIST COOLANT SELECTION?
    By Big Chips in forum BobCad-Cam
    Replies: 4
    Last Post: 06-09-2013, 02:48 AM
  4. How much air for mist coolant?
    By Memran in forum Benchtop Machines
    Replies: 51
    Last Post: 02-08-2012, 10:15 PM
  5. Coolant, Flood, Mist, WD-40, etc
    By Smitty911 in forum Benchtop Machines
    Replies: 37
    Last Post: 11-15-2009, 04:15 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules