525,809 active members*
3,020 visitors online*
Register for free
Login

Thread: Hsm ?

Results 1 to 5 of 5
  1. #1
    Junior Member
    Join Date
    Nov 2018
    Posts
    3

    Hsm ?

    For HSM, which is more important, cutting speed or spindle rpm? Specifically, if I use a very large-diameter cutter, I will have high cutting speed but low spindle rpm. Can this be regarded as HSM?

  2. #2
    Member
    Join Date
    Jan 2019
    Posts
    74
    Yes. You mean cutting feed.

  3. #3
    Member
    Join Date
    Nov 2019
    Posts
    2
    cutting speeds are usually given by the tooling supplier for different groups of metals. These variables are used in the formula to calculate RPM. Short version. (CS x 4)/diameter.

  4. #4
    Registered
    Join Date
    Feb 2011
    Posts
    301

    Re: Hsm ?

    your post is in hsm but what is the question ?

  5. #5
    Member
    Join Date
    Jul 2020
    Posts
    1

    Re: Hsm ?

    High speed cutting machines are usually supper fast and larger the size the speed will be reduced, smaller the size, the rpm will be much higher. This is as per my understanding from krogerfeedback.com and if its wrong, do share your comment on this.
    Last edited by kaylah63; 07-13-2020 at 01:49 PM. Reason: missed some points

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •