My manual only goes up to 02065 and then skips to 3000.
Been tripping this alarm very frequently recently.
It's popped up before now and aggin. but pretty serious about it right now.
A quick re-boot clears it, and the machine doesn't even need aligned afterward, but - we're not gitt'n much done this way ....
Not sure what's triggering it.
???
.
Results 1 to 2 of 2
-
11-14-2018, 08:34 PM #1
Registered
- Join Date
- Jan 2009
- Posts
- 42
A950 - Error 02066 - "APC Brd 1 Core Error 12"
-
11-16-2018, 02:39 AM #2
Registered
- Join Date
- Dec 2006
- Posts
- 584
Re: A950 - Error 02066 - "APC Brd 1 Core Error 12"
An internal error on the APC core board. The first number is the board number with the error and the other number it the error code
MIKE CNC Machine Services INC | Cincinnati Milacron MachinesCNC Machine Services
Reply With QuoteSimilar Threads
-
LaserCut 6.1 Error "C0000005" when "Download Current CFG"
By lgastmans in forum LaserCutReplies: 3Last Post: 09-11-2020, 05:12 AM -
Fanuc Oi-MB "750" and "5136" error
By emre2blue in forum FanucReplies: 4Last Post: 11-27-2017, 07:37 AM -
How to remove error " Turret out of position" in Ge fanuc 21i-t controller for lathe?
By shanu4454 in forum Phase ConvertersReplies: 5Last Post: 09-22-2014, 04:05 AM -
"master encoder state error" AB ultra100 error message
By ShapeShaver in forum Servo Motors / DrivesReplies: 3Last Post: 07-31-2013, 04:09 PM -
Mazak T-2 "20 NMI Emergency Stop" Error"
By Jeff_Y in forum Mazak, Mitsubishi, MazatrolReplies: 13Last Post: 01-11-2011, 05:35 PM
Tags for this Thread
Posting Permissions
