540,315 active members*
1,018 visitors online*
Register for free
Login

Thread: Jigsaw Weld

Results 1 to 3 of 3
  1. #1

    Join Date
    Nov 2018
    Posts
    2

    Jigsaw Weld

    Hello all,
    I've been tinkering with these center mullions for a lot longer than I care to admit. I've managed to mostly reverse engineer a previous drawing. What is happening: when I start using Jigsaw Weld for the inside pattern it doesn't seem to detect where some of the lines intersect. Yet if my outside square is a 1/4" smaller everything works perfectly.
    The more and more I play with this the closer I get but in this current state nothing seems to work in my favor. I've attached the .dwg file if anyone cares to take a look.

  2. #2

    Join Date
    Nov 2018
    Posts
    2

    Re: Jigsaw Weld

    Follow up from EnRoute and got the drawing parts resolved! Instead of using the Jigsaw feature I could have used the Extend/Trim Line tool and just trim boundary lines. This pulls the overlaps out and allows me to set a contour toolpath. Just have to choose to follow the contour line on the parameters. It doesn't come out 100% the way I want BUT at least I now know of other options instead of being stuck with the Jigsaw tool.

  3. #3
    Member
    Join Date
    Mar 2021
    Posts
    2

    Re: Jigsaw Weld

    Hello Everyone
    I have trying these jigsaw tools from the Best Jigsaw

Similar Threads

  1. Custom Jigsaw Puzzle
    By P.Passuello in forum Videos
    Replies: 0
    Last Post: 08-20-2014, 10:56 AM
  2. cutting jigsaw puzzles
    By xhorton in forum General Laser Engraving / Cutting Machine Discussion
    Replies: 6
    Last Post: 12-13-2012, 04:46 PM
  3. Jigsaw delight
    By CNCadmin in forum EnRoute
    Replies: 0
    Last Post: 04-27-2012, 06:00 AM
  4. CNC router or jigsaw
    By bbsmfg in forum DIY CNC Router Table Machines
    Replies: 1
    Last Post: 09-02-2006, 02:18 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •