584,833 active members*
5,491 visitors online*
Register for free
Login
IndustryArena Forum > Manufacturing Processes > Milling > Door open request at the end of program cancell
Results 1 to 2 of 2
  1. #1
    Join Date
    Nov 2018
    Posts
    2

    Door open request at the end of program cancell

    Hi everyone i am new to this forum and its my first post. However i used this forum to solve my previous problems multiple times so thank you all for collecting such vast knowledge in one place

  2. #2
    Join Date
    Nov 2018
    Posts
    2
    Ok so I got this far:
    To avoid M30 I can use GOTOS function and for the machine to stop and wait for cycle start button i can use a single block and SBLON and SBLOFF functions at the beginning of a program so it only performs single block once. I got it working with plain gcode just fine however boys are using a lot of shopmill and this is where SBLON and SBLOFF functions stop working.

    So I need a function that will stop the machine just like M1 but without a need to open the door. Or I need to alter the way machine acts with M1 so that it doesnt request the door to be open.

    Any ideas?

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •