585,762 active members*
4,355 visitors online*
Register for free
Login

Thread: Error in Solidcam Postprocessor

Results 1 to 3 of 3
  1. 11-16-2018, 08:06 AM #1
    junior1505
    junior1505 is offline Member
    Join Date
    Jul 2014
    Posts
    15

    Error in Solidcam Postprocessor

    Greetings from India.
    Am trying out a CAM program for one of the component in SolidCAM 2018 trial version.
    There is one roughing (HSR) and one finishing (HSM) program for the component. The simulation does work good.
    When the GCode is generated we find that the postprocessor does have in one of the block as J0. K2 and this is creating an error on the VMC and we are unable to proceed.
    can anyone help me in this?
    Regards.
    Reply With Quote Reply With Quote
  2. 11-19-2018, 04:25 AM #2
    partur
    partur is offline Registered
    Join Date
    May 2013
    Posts
    37

    Re: Error in Solidcam Postprocessor

    Turn off the SolidCAM and go to solidcam postprocessor path, next you need open your machine file with *.vmid extension. Then on second tab (controller definition) open section named Arc Execution Definition and check U have Arcs in ZX/YZ Plane set to NO.

    Attachment 406190

    Save changes and go back to solidcam.

    Regards
    Reply With Quote Reply With Quote
  3. 11-21-2018, 05:01 AM #3
    junior1505
    junior1505 is offline Member
    Join Date
    Jul 2014
    Posts
    15

    Re: Error in Solidcam Postprocessor

    Greetings Partur,
    Appreciate the suggestion.
    We did try that and have some error. Files attached.
    Regards.
    Attached Thumbnails Attached Thumbnails Solidcam error 2.jpg   Solidcam error.jpg  
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Solidcam Postprocessor
    By solidcamx in forum SolidCAM for SolidWorks and SolidCAM for Inventor
    Replies: 80
    Last Post: 05-28-2023, 09:54 PM
  2. TNC355 postprocessor SolidCam
    By solidcamx in forum SolidCAM for SolidWorks and SolidCAM for Inventor
    Replies: 2
    Last Post: 05-16-2021, 11:15 AM
  3. Solidcam Error - Can't uncompress CAM-part. Check SolidCAM temporary folder
    By scottbryce in forum SolidCAM for SolidWorks and SolidCAM for Inventor
    Replies: 4
    Last Post: 08-28-2018, 03:29 AM
  4. postprocessor for solidcam
    By Danny@je-peders in forum Post Processor Files
    Replies: 1
    Last Post: 11-14-2013, 03:15 PM
  5. Solidcam to Postprocessor Data.
    By oldraven in forum SolidCAM for SolidWorks and SolidCAM for Inventor
    Replies: 2
    Last Post: 04-28-2011, 07:37 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules