584,874 active members*
5,144 visitors online*
Register for free
Login
Results 1 to 4 of 4
  1. #1
    Join Date
    Feb 2018
    Posts
    40

    Pokeys57cnc connections

    Question. The enable pin for the motor connections on the Pokeys57cnc, are labeled "Enable Inverted".

    What does that mean ??

    Is it grounding or powering the enable pin ?? So does this go to Enable + or Enable -

  2. #2
    Join Date
    Apr 2014
    Posts
    215
    Quote Originally Posted by Miamijerry View Post
    Question. The enable pin for the motor connections on the Pokeys57cnc, are labeled "Enable Inverted".

    What does that mean ??

    Is it grounding or powering the enable pin ?? So does this go to Enable + or Enable -

    It means it's enabled when it's off (deactivated)

  3. #3
    Join Date
    Apr 2014
    Posts
    215
    Quote Originally Posted by Miamijerry View Post
    Question. The enable pin for the motor connections on the Pokeys57cnc, are labeled "Enable Inverted".

    What does that mean ??

    Is it grounding or powering the enable pin ?? So does this go to Enable + or Enable -

    Having read the manual it goes to the enable +, and you wire the enable - to gnd

  4. #4
    Join Date
    Feb 2018
    Posts
    40

    Re: Pokeys57cnc connections

    Quote Originally Posted by robertspark View Post
    Having read the manual it goes to the enable +, and you wire the enable - to gnd
    Thank you

Similar Threads

  1. Pokeys57cnc board questions
    By jkcab95 in forum Controller Cards
    Replies: 4
    Last Post: 01-21-2019, 08:36 PM
  2. Mach 4 and Pokeys57cnc
    By hotrd717 in forum Mach 4
    Replies: 4
    Last Post: 12-28-2018, 10:51 AM
  3. Using Pokeys57cnc and UCCNC software
    By chavadj in forum CNC Plasma / Oxy Fuel Cutting Machines
    Replies: 3
    Last Post: 08-07-2018, 06:32 AM
  4. NEED HELP with connecting my VFD/Spindle to Pokeys57CNC board.
    By z05 in forum CNC Machine Related Electronics
    Replies: 0
    Last Post: 11-02-2017, 10:54 PM
  5. uccnc with pokeys57cnc
    By habibmgh in forum UCCNC Control Software
    Replies: 4
    Last Post: 08-17-2016, 11:41 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •