584,826 active members*
5,364 visitors online*
Register for free
Login
IndustryArena Forum > Machinery Manual, Brochure / Photo Archives > Machinery Manuals / Brochures > Manual book and hydraulic diagram Amada Shearing H-3013
Results 1 to 9 of 9
  1. #1
    Join Date
    May 2015
    Posts
    16

    Manual book and hydraulic diagram Amada Shearing H-3013

    Hi everyone..

    I need manual book and hydraulic diagram Amada shearing H-3013.
    Please share..

    Your help very appreciated..

    Regards..

  2. #2
    Join Date
    Oct 2008
    Posts
    27

    Re: Manual book and hydraulic diagram Amada Shearing H-3013

    Operator's manual, what is the production date of the machine?
    Attached Files Attached Files

  3. #3
    Join Date
    May 2015
    Posts
    16

    Re: Manual book and hydraulic diagram Amada Shearing H-3013

    Dear Hemikiller,

    Thank you for your reply..

    Production date November1996, see below photo..



    regards..

  4. #4
    Join Date
    Oct 2008
    Posts
    27

    Re: Manual book and hydraulic diagram Amada Shearing H-3013

    Here's the hydraulic diagram for the late machines

  5. #5
    Join Date
    May 2015
    Posts
    16

    Re: Manual book and hydraulic diagram Amada Shearing H-3013

    Hi Hemikiller..

    Thank you for your help..
    My Machine Amada shearing H-3013 the hydraulic oil temperature is very hot/high (we can't touch the cylinder and the pipe because it's very hot).. i'm still checking what caused the problem..

    As I checked on the manual for the hydraulic oil supposed to use Shell tellus 27 but currently I used shell tellus 46.. Do you think the problem because of this??
    Or setting pressure on the hydraulic valve (RV, PRV and URV) not properly??

    Regards..

  6. #6
    Join Date
    Mar 2009
    Posts
    101

    Re: Manual book and hydraulic diagram Amada Shearing H-3013

    1st off you need to run the correct oil. Amada techs dont put in various oils and record what happens. 2nd I would check your accumulator pressure. When ram reaches bottom of stroke do you hear a loud bang? That means safety valve is kicking in. Low on nitrogen. #3 They do run pretty hot, maybe you never noticed before.

    Best regards,

  7. #7
    Join Date
    May 2015
    Posts
    16

    Re: Manual book and hydraulic diagram Amada Shearing H-3013

    Dear Amadajoe,

    Thank you for your feedback..

    Last time I check accumulator pressure +- 60 bar, bigger than standard on the manual (around 30 bar )

    And how to setting RV, PRV, and URV valve? Currently I check the machine it's fully adjusted/not properly adjusted.
    Because i think this machine also have problem low pressure..


    Your help very appreciated.

    Regards,.

  8. #8
    Join Date
    Mar 2009
    Posts
    101

    Re: Manual book and hydraulic diagram Amada Shearing H-3013

    Why are you overcharged on your accumulator? If you are @ 60 bar and manual says 30. You need to drop it big time. I have never had any reason to adjust valves. If you are going to move valves, measure thread with a caliper so you can set back to original condition.

  9. #9
    Quote Originally Posted by Hemikiller View Post
    Operator's manual, what is the production date of the machine?
    C?m ?n b?n

Similar Threads

  1. Takisawa TC-2 CNC lathe, need manual book, electric book, fanuc manual
    By godzila in forum Machinery Manuals / Brochures
    Replies: 14
    Last Post: 07-20-2021, 05:43 AM
  2. Amada Vipros 357 Hydraulic Top Dead Center Issues
    By Luftegrof in forum DNC Problems and Solutions
    Replies: 2
    Last Post: 02-14-2017, 05:35 PM
  3. AMADA NC9 need some wire diagram or manual
    By Suxo in forum DNC Problems and Solutions
    Replies: 0
    Last Post: 05-14-2016, 11:48 PM
  4. Connection Diagram AMADA Fanuc
    By CNC Business in forum Want To Buy...Need help!
    Replies: 0
    Last Post: 02-06-2013, 05:31 AM
  5. QC12Y-8x600 shearing machine digram manual
    By cyruss07 in forum Machinery Manuals / Brochures
    Replies: 0
    Last Post: 12-13-2012, 07:28 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •