Hello guys,
I have a problem with my machine. When program (spindle, axis and water pump) started or turn off, machine sometimes showing a Gross positioning error... Sometimes when spindle rotate and I hand turn on pump is the same problem. I know what mean Gross positionig error, but now it is not relate with loose in machine. It look like the voltage dropped... I change contactor from pump and nothing better. I do not know where I should looking problem.
Results 1 to 3 of 3
-
11-19-2018, 01:58 PM #1
Member
- Join Date
- Jun 2015
- Posts
- 46
Cincinnati Sabre 1000 HH 415 ERROR when start pump
-
11-20-2018, 05:02 PM #2
Registered
- Join Date
- Dec 2006
- Posts
- 584
Re: Cincinnati Sabre 1000 HH 415 ERROR when start pump
WHAT IS YOUR INCOMING VOLTAGE, Are you running this machine on a phase converter or industrial 3 phase? It sounds like it is related to a voltage drop. What control and drives do you have on this machine?
MIKE CNC Machine Services INC | Cincinnati Milacron MachinesCNC Machine Services
-
11-21-2018, 08:12 AM #3
Member
- Join Date
- Jun 2015
- Posts
- 46
Re: Cincinnati Sabre 1000 HH 415 ERROR when start pump
It is HH 415 BR. Drives FANUC. Sometimes, but very rarely on PCB show LV LED. Machine is connect to 3phase. I have 3 other machine which working fine.
Reply With QuoteSimilar Threads
-
Cincinnati sabre 1000 Fanuc control parameters
By Stealth XY in forum Cincinnati CNCReplies: 7Last Post: 11-01-2019, 01:59 AM -
Solidcam / solidworks on a Cincinnati sabre 1000
By Stealth XY in forum SolidCAM for SolidWorks and SolidCAM for InventorReplies: 3Last Post: 07-27-2011, 07:57 AM -
Cincinnati Sabre 1000 - seeking information
By nlh in forum Uncategorised MetalWorking MachinesReplies: 0Last Post: 02-24-2008, 03:35 PM -
Help on Cincinnati Sabre 1000
By alexanderrt in forum Hard / High Speed MachiningReplies: 0Last Post: 03-01-2006, 05:30 PM
Tags for this Thread
Posting Permissions
