584,830 active members*
5,897 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    Oct 2015
    Posts
    4

    Engraving edges too deep

    Helo, I have new laser, 40w with ruida controller.
    When I engrave something, edges of engraving are deeper than rest.
    Tried also lightburn software, slowed down acceleration, tried many speed/power combinations but no luck.
    Alignment is perfect.
    Check photo please.
    Any advice?

  2. #2
    Join Date
    Jul 2016
    Posts
    660

    Re: Engraving edges too deep

    Try engraving it with plastic, wood in many cases it has a softer and harder part, you can also try engraving it on a hardwood

  3. #3
    Join Date
    Oct 2015
    Posts
    4

    Re: Engraving edges too deep

    Tried also different wood, plastic and leather. Its same result.
    Looks like tube first fire is stronger..

Similar Threads

  1. Deep Engraving
    By Welder2022 in forum Fadal
    Replies: 1
    Last Post: 09-21-2016, 06:57 AM
  2. Lines forming on the edges of my engraving!
    By rustyhill in forum Laser Engraving / Cutting Machine General Topics
    Replies: 3
    Last Post: 02-17-2014, 12:37 PM
  3. deep laser engraving
    By wally188 in forum RFQ (Request for Quote)
    Replies: 0
    Last Post: 03-28-2012, 07:24 PM
  4. Deep engraving in metal
    By VaderSpade in forum Laser Engraving / Cutting Machine General Topics
    Replies: 8
    Last Post: 02-28-2012, 12:03 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •