512,585 active members
3,436 visitors online
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Registered
    Join Date
    Oct 2017
    Posts
    6

    Fanuc Test Stand

    Hi all I am having problems getting the error of:

    410: Servo Alarm : X axis excess err

    can anyone help me solve the issue?

  2. #2
    Member
    Join Date
    Dec 2013
    Posts
    38

    Re: Fanuc Test Stand

    Check the Motor cable and axis load , Jog in Low rpm and check the load

  3. #3
    Junior Member
    Join Date
    Jan 2014
    Posts
    65
    Check on the servo screen. X axis feedback while you try to handle the position on the CNC screen may be counting and expecting to move but the encoder value is not moving on the feedback screen..
    So yes check the motor cable, or see if the motor is jammed up.

Similar Threads

  1. Fanuc Test System
    By learning_elec in forum Fanuc
    Replies: 3
    Last Post: 12-04-2018, 03:50 AM
  2. Replies: 1
    Last Post: 10-19-2018, 04:40 PM
  3. Fanuc Test Stand
    By learning_elec in forum Fanuc
    Replies: 3
    Last Post: 03-17-2018, 04:49 AM
  4. Replies: 0
    Last Post: 09-15-2015, 08:28 AM
  5. Can I lift my 1100 w/ the stand or should I remove the stand?
    By KSky in forum Tormach Personal CNC Mill
    Replies: 5
    Last Post: 05-15-2015, 09:12 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •