584,802 active members*
4,822 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Nov 2004
    Posts
    239

    Gear Out Position Error

    I am getting a gear out position error on my Romi 35E.
    As far as I can tell there are 4 switches. 2 are on the handle below the CRT.
    I believe the other 2 are on the headstock below the CRT. When the hydraulics come on there is a rod which engages a switch.
    This rod always extends to the right and engages the switch on the right.
    Not sure I'm on the right track.

  2. #2
    Join Date
    Nov 2004
    Posts
    239

    Re: Gear Out Position Error

    Fixed. You have to select the gear through M11 or 12,13, or 14 as far as I could tell. All cleared up now.

Similar Threads

  1. Position Error
    By sabine in forum Centroid CNC Control Products
    Replies: 2
    Last Post: 08-14-2018, 05:16 PM
  2. Position following error
    By bob1011 in forum Leadshine
    Replies: 1
    Last Post: 01-09-2017, 08:31 PM
  3. Yaskawa Servopack error: A.D1. Motor Load Position Excess Error
    By Syphonics in forum Servo Motors / Drives
    Replies: 0
    Last Post: 04-26-2012, 07:53 AM
  4. OLD UHU POSITION ERROR
    By dfv in forum UHU Servo Controllers
    Replies: 2
    Last Post: 03-22-2010, 06:16 PM
  5. K2 CNC position error - please help !
    By Geetar-ist in forum K2CNC
    Replies: 5
    Last Post: 09-13-2009, 10:24 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •