Hello:
I'm very new in CNC and don't know if this will be a bit out of topic here, I really apologize if that's the case.
I'm trying to make some pieces from Aluminium and the pockets comes out well but, when I try to make a 2D contour to separate it from the plate it always goes to 3mm depth instead the 1.5mm I have specified.
Maybe I'm trying to put the depths with the wrong "tool", I'm using "Multiple depths".
In the simulation appears correct, can be it a problem with the post processor? (I use GRBL) May it be a problem between Fusion and Candle?
Results 1 to 2 of 2
-
03-02-2023, 08:28 AM #1
- Join Date
- Mar 2023
- Posts
- 4
Need Help! Depth Per pass problem from Fusion360 to Candle
-
03-02-2023, 09:01 PM #2
Member
- Join Date
- Nov 2013
- Posts
- 4358
Re: Need Help! Depth Per pass problem from Fusion360 to Candle
Hi,
I use Fusion and you are correct to use 'Multiple Depths', but are you setting the required depth passes?
Craig
Reply With QuoteSimilar Threads
-
Y axis offsetting itself at each depth pass ?
By karnalta in forum LinuxCNC (formerly EMC2)Replies: 9Last Post: 12-31-2022, 02:27 AM -
pass depth and feed speed for a profile cut
By Alexone in forum MillingReplies: 2Last Post: 04-05-2019, 05:55 PM -
cut depth per pass
By christ371 in forum Dolphin CAD/CAMReplies: 3Last Post: 07-20-2008, 03:14 AM -
Z level finishing does not finish final depth pass
By TPPJR in forum OneCNCReplies: 13Last Post: 01-10-2006, 03:22 PM
Tags for this Thread
Posting Permissions
