515,351 active members
5,920 visitors online
Register for free
Login
IndustryArena Forum > GENERAL MANUFACTURING PROCESSES > EDM > Problem with gcode on charmilles robofil - errant moves not in g code
Results 1 to 1 of 1
  1. #1
    Junior Member
    Join Date
    Nov 2018
    Posts
    1

    Smile Problem with gcode on charmilles robofil - errant moves not in g code

    I'm fairly new to g-code but after programming a series of 6 holes by writing the program for one and then cut and pasting - just varying the start position, one of the holes throws a wrong cut - instead of cutting around the circumference of the circular hole, it runs left and cuts a line outside the circumference and then returns to the circumference line leaving an unwanted cut. It also does it on the simulator suggesting it is in the code - but it definitely isn't because it is just a cut and paste of the other holes that are identical - the only adjustment is the position. Anyone had anything like this or got a work round? We're stuck so any help welcome.
    Last edited by MStockbridge; 11-25-2018 at 11:27 AM.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •