513,014 active members
3,869 visitors online
Register for free
Login
IndustryArena Forum > CAM Software > Autodesk CAM > Autodesk Post Processors > Spectralight mill 0200: POST for Fusion 360 / Solidworks?
Results 1 to 2 of 2
  1. #1
    Registered
    Join Date
    Mar 2011
    Posts
    22

    Question Spectralight mill 0200: POST for Fusion 360 / Solidworks?

    Is there such a thing as a postprocessor for the Spectralight Mill 0200 for Fusion 360 or Solidworks CAM?

    I have one of these with the PCI card, in a Dell Optiplex 755, running Windows 10 64-bit. The CNCBase software works fine with Windows 10.

    ,

    I have been trying to figure out if the CNCBase G-code would be compatible with the RS-274 standard, but there seem to be some rather significant differences between them.

    Here is what I have determined so far, going through the G-codes and M-codes line by line:

    https://docs.google.com/spreadsheets...it?usp=sharing

  2. #2
    Member
    Join Date
    Apr 2015
    Posts
    283

    Re: Spectralight mill 0200: POST for Fusion 360 / Solidworks?

    Quote Originally Posted by DMahalko View Post
    Is there such a thing as a postprocessor for the Spectralight Mill 0200 for Fusion 360 or Solidworks CAM?

    I have one of these with the PCI card, in a Dell Optiplex 755, running Windows 10 64-bit. The CNCBase software works fine with Windows 10.

    I have been trying to figure out if the CNCBase G-code would be compatible with the RS-274 standard, but there seem to be some rather significant differences between them.

    Here is what I have determined so far, going through the G-codes and M-codes line by line:

    https://docs.google.com/spreadsheets...it?usp=sharing
    Hi,

    if you interersted about it you contact me on msskotak@gmail.com

    I have many experience with a postprocessing.

    Marek
    Alphacam post and VBA macros, Autodesk HSM post.
    www.cadcam-softcz.cz

Similar Threads

  1. spectralight mill 0200 & lathe 0400
    By fbplastic in forum Benchtop Machines
    Replies: 1
    Last Post: 05-09-2010, 02:56 AM
  2. spectralight 0200 mill(sherline)
    By vegasrndll in forum Benchtop Machines
    Replies: 0
    Last Post: 12-27-2006, 06:24 AM
  3. spectralight 0200
    By vegasrndll in forum Benchtop Machines
    Replies: 0
    Last Post: 12-17-2006, 02:24 AM
  4. spectraLIGHT 0200 mill software
    By dcmccall in forum Community Club House
    Replies: 0
    Last Post: 09-29-2006, 12:14 AM
  5. spectralight 0200 mill???
    By jclif in forum Community Club House
    Replies: 0
    Last Post: 09-19-2006, 03:03 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •