584,833 active members*
5,293 visitors online*
Register for free
Login
Results 1 to 4 of 4
  1. #1
    Join Date
    Dec 2014
    Posts
    62

    mycnc control software experiences?

    hello,
    i am using mach3 right now because i need the tangential control. it works but has a few bucks.
    i saw mycnc can do tangential control but i find very little user reviews about this software.

    has anybody used it and can tell his experience?
    thanks,
    michael

  2. #2
    Join Date
    Mar 2007
    Posts
    3

    Re: mycnc control software experiences?

    Hi Michael

    Yes I have been using myCNC software and boards for about 5 years now. all I can say is the faster you get away from Mach the better. The software that myCNC has is far superior to that of any mach stuff the smoothness of the steppers and the stability of the software is great. There is a but of messing around in the beginning , once you have got the system set up you are working with so much better equipment. The good thing is that it is cross platform and you can even run the software on a small SBC so you don't have to have this big clunky pc on your desk. If you buy the kits with the SBC and the touch screens you can put together a real kick ass system. The forum is also really great the help is relatively fast and always sorts out the problem. I truly recommend this software and hardware. check out the machine I built for a customer https://youtu.be/IWqZUa4V8NI hope this helps both you and the guys from myCNC

    Kind regards
    Chris

  3. #3
    ericks Guest

    Re: mycnc control software experiences?

    Chris, thanks for the information....i will also investigate this option further for my current machine build

  4. #4
    Join Date
    Dec 2014
    Posts
    62

    Re: mycnc control software experiences?

    thanks chris for the feedback.
    michael

Similar Threads

  1. Replies: 0
    Last Post: 07-18-2017, 12:01 AM
  2. Replies: 8
    Last Post: 03-14-2017, 04:52 PM
  3. myCNC - CNC control software, new features.
    By my-cnc in forum News Announcements
    Replies: 0
    Last Post: 01-29-2014, 06:12 PM
  4. myCNC - CNC control software
    By my-cnc in forum News Announcements
    Replies: 28
    Last Post: 04-28-2013, 05:50 AM
  5. MyCNC Build
    By adprinter in forum DIY CNC Router Table Machines
    Replies: 0
    Last Post: 08-16-2011, 10:13 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •