584,846 active members*
3,984 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > HURCO > Hurco VMX24s/Control dead? Help please,please.
Page 2 of 2 12
Results 21 to 26 of 26
  1. #21
    Join Date
    Nov 2018
    Posts
    25
    Humm..
    I have tried to request a add as a contact you.

  2. #22
    Join Date
    Jun 2008
    Posts
    1103

    Re: Hurco VMX24s/Control dead? Help please,please.

    I have done the same but it says you are not allowing private messages.

  3. #23
    Join Date
    Jun 2008
    Posts
    1103

    Re: Hurco VMX24s/Control dead? Help please,please.

    or send a PM to Roooster on the other site.

  4. #24
    Join Date
    Nov 2018
    Posts
    25
    Quote Originally Posted by bloke View Post
    or send a PM to Roooster on the other site.
    Email is the usarname with the @gmail.com

  5. #25
    Join Date
    Jun 2008
    Posts
    1103

    Re: Hurco VMX24s/Control dead? Help please,please.

    Sent.

  6. #26
    Join Date
    Nov 2018
    Posts
    25
    Hello
    Great news so far.
    The machine powered up and the Ethernet is working as well.
    The bios settings did it.
    I made a part and not noticeable issues on machining.
    How ever the monitor once go all black when machine was idle when i have 120 minutes on the timming.
    and wouldn't lid again. had to park machine (good i know from memory the steps) and restart.
    Also it froze once as well when it was already parked. Would not respond to keyboard or control keys.
    Is the video pushing to much for the peak card?
    rgs
    Valter

Page 2 of 2 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •