Hi Everyone,

I am currently designing a 5 axis vertical mill for aluminum and wood working.The main frame will be a weldment of steel I-beams and rectangular tubing. My total budget is $5K and I plan on making it fully enclosed with sliding doors.

I am in the middle of sourcing components but already bought the following:

• 3X 1200oz-in NEMA 34 Stepper motors/ 7 amp stepper drivers
• 20mm Linear rails and 16mm Ball Screws (1500mm, 1000mm, and 400mm)
• NVEM 6 Axis Mach 3 controller and handheld MPG
• 2.2KW Spindle with ER20 collet
• 3X Steel I-Beams 4'' Deep 8ft Long

See attached pictures. I also uploaded a 3D PDF.

I would appreciate any input from the more experienced folks here!