584,837 active members*
5,785 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    Sep 2014
    Posts
    66

    roundover bit 25.4mm

    HI. I am considering using a 1" (25.4mm) roundover bit - without the bearing, see photo.


    For feeds & speeds how should I think of it? V-bit, End mill, form bit?


    In ferreting out info from various sites the speeds & feeds are frightening to me .


    Any advice appreciated.
    Thanks.
    Attached Thumbnails Attached Thumbnails roundover bit.png  

  2. #2
    Join Date
    Mar 2003
    Posts
    35538

    Re: roundover bit 25.4mm

    Assuming your cutting wood, try 12,000-14,000 rpm, and 100-150ipm.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

  3. #3
    Join Date
    Sep 2014
    Posts
    66

    Re: roundover bit 25.4mm

    Thanks.

Similar Threads

  1. Radius router bit for roundover fillet?
    By j_omega in forum DIY CNC Router Table Machines
    Replies: 5
    Last Post: 11-16-2018, 03:51 AM
  2. Replies: 4
    Last Post: 08-07-2015, 05:19 AM
  3. 3d contouring possible with a roundover bit?
    By alex781 in forum SolidCAM for SolidWorks and SolidCAM for Inventor
    Replies: 0
    Last Post: 09-05-2010, 01:41 PM
  4. online source for plunge roundover bits?
    By groomden in forum DIY CNC Router Table Machines
    Replies: 2
    Last Post: 04-25-2009, 03:33 PM
  5. Tool Library and Roundover Toolpaths
    By Natchamp in forum Visual Mill
    Replies: 4
    Last Post: 07-12-2004, 02:53 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •