584,802 active members*
4,955 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Hardinge Lathes > Hardinge Cobra 42 spindle drive problem
Results 1 to 3 of 3
  1. #1
    Join Date
    Dec 2018
    Posts
    8

    Hardinge Cobra 42 spindle drive problem

    I just replaced my magnatek Gpd 505 drive because it took a dump on me. I bought a Yaskawa A1000 drive for it because they said it was plug and play. I knew it was to good to be true! My issue is the parameters in the drive. I don't know what the parameters are supposed to be in the new A1000 drive and I can't copy them from the old Magnatek GPD-505 because it's fried. The previous maintenance guy never saved the parameters on a log sheet so I'm lost. My book doesn't say anything. Any help would be greatly appreciated

    Sent from my Z982 using Tapatalk

  2. #2
    Join Date
    Mar 2010
    Posts
    1852

    Re: Hardinge Cobra 42 spindle drive problem

    Get with this guy. He can probably help you out. He has repaired drives for me.

    Zaritron
    Two Haas VF-2's, Haas HA5C, Haas HRT-9, Hardinge CHNC 1, Bother HS-300 Wire EDM, BobCAD V23, BobCAD V28

  3. #3
    Join Date
    Nov 2008
    Posts
    94

    Re: Hardinge Cobra 42 spindle drive problem

    Did you ever get the YASNAC to work in your Cobra?

Similar Threads

  1. Hardinge Cobra 42 vfd problem
    By Dsenterfitt in forum Bridgeport / Hardinge Mills
    Replies: 11
    Last Post: 12-04-2020, 02:54 AM
  2. Cobra 42 Spindle Drive
    By Jtoothman in forum Mini Lathe
    Replies: 1
    Last Post: 08-04-2014, 06:50 PM
  3. hardinge conquest 42 VS cobra 42
    By mls in forum Hardinge Lathes
    Replies: 5
    Last Post: 09-07-2010, 10:42 PM
  4. Parameters on Cobra 42 Hardinge
    By Niall in forum Bridgeport / Hardinge Mills
    Replies: 0
    Last Post: 07-16-2004, 10:38 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •