i want to ask a question. I have an okuma v50 milling center. This machine has osp-u10m with rs232 interface on it. but there is no dnc option in the software. Do i have to re install operating system to open dnc option or is there any other option. If anyone answer my question i would be glad thanks.
Thread: OKUMA DNC
Results 1 to 3 of 3
-
04-21-2014, 02:17 PM #1
- Join Date
- Dec 2013
- Posts
- 1
OKUMA DNC
-
04-21-2014, 06:33 PM #2
Member
- Join Date
- Mar 2009
- Posts
- 1982
Re: OKUMA DNC
Check the OSP Data Management Card for control specifications first. If control has the option. It's option for U10 - not equipped by default, costs extra $$$.
There is page in parameters where you can switch on some parameter pages to be accessible. Some sensitive machine parameter setting pages are hidden by default.
-
01-24-2019, 06:25 PM #3
Banned
- Join Date
- Apr 2011
- Posts
- 112
Re: OKUMA DNC
how did you fix this im olso missing the dnc meniu ?
tnx
Reply With QuoteSimilar Threads
-
INFO? for programming Okuma LOADERs for OKUMA LFS15-2SP ROBUSTURN TWIN SPINDLE CNC
By ohallock in forum OkumaReplies: 4Last Post: 10-02-2014, 04:58 AM -
Okuma OSP3000 & Okuma DTE (data tape emulator)
By Wade C in forum OkumaReplies: 2Last Post: 11-11-2010, 09:37 AM -
Okuma Howa Vs Okuma
By gcrudgington in forum OkumaReplies: 5Last Post: 07-01-2010, 03:11 PM -
Anyone have a manual for a 250psi Okuma TSC pump for Okuma Mill?
By Edster in forum OkumaReplies: 1Last Post: 08-28-2008, 02:09 PM -
Difference between a Okuma & Okuma Howa
By 69owb in forum OkumaReplies: 7Last Post: 06-04-2008, 05:51 PM
Posting Permissions
