I’m having some trouble finding manuals for my machine. The machine will power on but the control will not. Do I need a manual for my machine or can I get a manual for a fanuc 0T control?
Edit. Title should say Faunc. Darn autocorrect on iphone
I’m having some trouble finding manuals for my machine. The machine will power on but the control will not. Do I need a manual for my machine or can I get a manual for a fanuc 0T control?
Edit. Title should say Faunc. Darn autocorrect on iphone
You would need the wiring diagram for the machine from Bridgeport
Made a little progress. I am following a flowchart for troubleshooting.
The board I'm testing is an A16B-2201-0101
I am at the flowchart block that says "-CRT Defective, - Memory Card Defective, -Master printed-circuit board defective"
The CRT is on sort of. It has random green pixels. I can change the brightness, horizontal, vertical so I believe its good.
I need to narrow it down a little more since a replacement main board and memory board are expensive.
The memory board has an LED. It also has several pins labeled +5V, GND, LOAD, ROMP, +24E, +24V, +15V -15V.
Should the led be powered on when the machine is powered up?
Should I be able to read the volts from those pins?
Way past all those errors now. I wasn't able to find a operators manual. Anyone know how to home this machine?
What does parameter 22 say ?