Hi guys i am new to this forum. Anyhow i have a problem i just bought a used taig Micro mill with the 2000DS/LS controller and servos installed. I installed Mach 3 and conntected the printer port to controller and configured my step/dir pinouts to manufacturs specs and i am not getting in movement nothing at all. my pc is a Windows 7 (32bit) with Mach 3 demo installed. Now the other day one of the servos (X axis) was getting extremely hot, this was not normal so i quickly powered off. I heard i need a USB to Parallel port
Interface for newer Windows? Is this correct? Pleas help, thanks and bles you for your help guys