[mmurray70]

Hey Tom,

I think I told you a while ago that id post a video of my machine rigid tapping but I dont think I ever did. Ran some little Delrin parts today and figured this would be a good chance since theres no coolant and you can actually see it. Fairly simple part, one end drilled and reamed, other end drilled and tapped with a few different diameter steps, and a threaded cross hole. Rigid tapping and the 4th axis are working great.

See attached pic, and video is here:

Mark

[TomKerekes]

Hi Mark,

So cool! Nice quality Video. 10 Tools making 4 parts in under 5 minutes.

I hope you don't mind I uploaded to our YouTube Channel:

https://youtu.be/qfY4WMXaTAw

[mmurray70]

Hi Tom,

Glad you like it, yeah this method worked out really good for these parts. Big save on time and toolchanges doing 4 at once and not having to flip them around in 3 different operations.

No worries about putting it on youtube, hopefully it will show others how awesome the Dynomotion system is. I took down the google drive link since you have it on youtube now. Thanks again for the help in getting everything setup with the 4th axis.

Mark