584,833 active members*
5,406 visitors online*
Register for free
Login

Thread: Ender 3

Results 1 to 2 of 2
  1. #1
    Join Date
    Feb 2009
    Posts
    192

    Ender 3

    New to the 3D printer arena and something must be wrong. I'm using the Ender 3 with Cura 3.4.1 and for some reason the print will start at the lower left side of the bed. The model view shows it centered. How do I change the work offset away from the corner of the bed?

  2. #2
    Join Date
    May 2013
    Posts
    149
    Quote Originally Posted by plcamp View Post
    New to the 3D printer arena and something must be wrong. I'm using the Ender 3 with Cura 3.4.1 and for some reason the print will start at the lower left side of the bed. The model view shows it centered. How do I change the work offset away from the corner of the bed?
    You need to select a new machine definition or make one.
    Wisdom results from foolishness!

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •