Hi Guys,
Is there a procedure for adjusting the Y-axis gib other than trial and error? I needed to disassemble the Tormach (1100) for a recent move and now need to reset the gib adjustment.
Thanks,
Robert
Hi Guys,
Is there a procedure for adjusting the Y-axis gib other than trial and error? I needed to disassemble the Tormach (1100) for a recent move and now need to reset the gib adjustment.
Thanks,
Robert
This video might help
https://www.youtube.com/watch?v=z6RzDphty_o
Dave
Thanks, I'll take a look.