[JohnnyBr]

Hi guys,

Our company recently bought an old lathe machine that runs on GE Fanuc Series 15-T / Symbolic FAPT Turn.

It's nothing that we have ever came across and it seems nobody knows how to operate it. Reading the manual doesn't help unfortunately.

Whenever any buttons are pressed, we don't seem to get any response from the machine? It's rather weird.


If anyone could point me in the right direction it will be very much appreciated.

Thank you.

[egees]

Hi guys,

Our company recently bought an old lathe machine that runs on GE Fanuc Series 15-T / Symbolic FAPT Turn.

It's nothing that we have ever came across and it seems nobody knows how to operate it. Reading the manual doesn't help unfortunately.

Whenever any buttons are pressed, we don't seem to get any response from the machine? It's rather weird.


If anyone could point me in the right direction it will be very much appreciated.

Thank you.

Hi JohnnyBr,

Did you manage to get the machine running? We have 2 Monforts one RNC7 and another RNC4 (both Fanuc 15T) and we are also trying to figure how to get the machine to run.

It seems that we are facing the exact same issue of the machine not responding when the buttons are pressed.

[memoryman]

Have you considered getting rid of the FAPT?