584,830 active members*
5,379 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    Dec 2018
    Posts
    1

    System 3R Workmaster Hand Control

    Hi,

    This is my first post, so I be hope it makes sense! We have 2- 3R Workmaster systems (fairly old) and both pendants (hand controls) have been going out. We purchased new ones for 6k a piece. This is an old system, and I was wondering if anybody had any insights into this.

    We replaced a faulty transistor inside on the main board, and they worked okay for about 10 months. They are now acting up again. The pic is one of their symptoms. I will post more pics when I get back to work. I know this info is pretty vague. Thanks for your time.

    Pauly
    Attached Thumbnails Attached Thumbnails IMG955080.jpg  
    Last edited by PaulySuave; 12-15-2018 at 03:17 AM. Reason: Typo

  2. #2
    Thanks for sharing this useful information about System 3R, whether this is your first post but it is informative. Keep in touch with this type of conversation. You can get more information here https://bit.ly/2LgxZUD

  3. #3
    Join Date
    Jun 2019
    Posts
    1
    Nice to see this here.Thanks for sharing this useful information about System 3R, whether this is your first post but it is informative. Here you will get more about 123 movies.to for watching movies on online.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •