584,846 active members*
4,582 visitors online*
Register for free
Login

Thread: Fusion 360

Results 1 to 5 of 5
  1. #1
    Join Date
    Jan 2007
    Posts
    7

    Fusion 360

    Hello, my son and I have been working on drawing a motor cylinder with Fusion 360 and are stuck when trying to draw the transfer ports inside of the cylinder. We have watched/read hours of videos and articles and are at a complete loss on what we are doing wrong. Is there an advanced user that would be willing to work with us to figure this out? I can’t explain it so I was hopping we could somehow share the drawing. Thanks

  2. #2
    Join Date
    May 2005
    Posts
    1662

    Re: Fusion 360

    Quote Originally Posted by kenrc View Post
    Is there an advanced user that would be willing to work with us to figure this out? I can’t explain it so I was hopping we could somehow share the drawing. Thanks
    I would post this to Autodesk's Fusion 360 forum, anyone who can help you here is probably also hanging out there. You'll be asked for the .f3d file.
    Anyone who says "It only goes together one way" has no imagination.

  3. #3
    Join Date
    Jan 2007
    Posts
    7

    Re: Fusion 360

    Thank you, I think we have someone helping but if not I will post over there as well.

  4. #4
    Join Date
    Oct 2017
    Posts
    49
    Quote Originally Posted by kenrc View Post
    Thank you, I think we have someone helping but if not I will post over there as well.
    I'm up to help of you have questions.

  5. #5
    Join Date
    Jan 2007
    Posts
    7

    Re: Fusion 360

    Thank you Jg, someone else has offered as well and if we stump him I will be in contact. Thanks again, Ken

Similar Threads

  1. FUSION-360 X,Y,Z
    By gibson22 in forum Mach Software (ArtSoft software)
    Replies: 2
    Last Post: 02-03-2017, 08:09 PM
  2. Fusion 360
    By Profm in forum Tormach Personal CNC Mill
    Replies: 8
    Last Post: 03-03-2016, 11:26 PM
  3. 3D in Fusion 360?
    By JohnToner in forum Autodesk
    Replies: 4
    Last Post: 12-24-2014, 03:07 PM
  4. WTB: x2 cnc fusion x,y,z kit
    By shibby_cbs in forum Benchtop Machines
    Replies: 2
    Last Post: 01-02-2014, 07:08 PM
  5. CNC Fusion
    By Memran in forum Benchtop Machines
    Replies: 1
    Last Post: 04-04-2007, 12:20 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •