I made 4 axes for my cnc. I run CNC with mach3 program. I tried to make the G code for the 4th axis in Artcam2008, but I do not know which postprocessor to choose? 4th axis I have X-axis oriented. G code I tried to do as instructed from the video on youtube . Artcam makes a g code and makes the simulation correct but does not enter the A axis into the file with g code.
https://www.youtube.com/watch?v=AoRbLgOvoxc&t=169s
Attachment 407812
Thread: Artcam 2008 4th axis
Results 1 to 3 of 3
-
12-16-2018, 08:44 AM #1
Registered
- Join Date
- Sep 2010
- Posts
- 54
Artcam 2008 4th axis
-
12-16-2018, 03:50 PM #2
Member
- Join Date
- Oct 2016
- Posts
- 1174
Re: Artcam 2008 4th axis
Because you only have a postprocessor for 3 axes! Need postprocessor for 4 axes!
-
01-02-2019, 11:23 AM #3
Registered
- Join Date
- Sep 2010
- Posts
- 54
Re: Artcam 2008 4th axis
When creating a milling path, (Z level roughing) for 4 A axis, how to define Z Slices? If I leave Avtomatic, it begins to milling 0.5mm (the material allowance I have set is 0.5mm) above the center of the cylinder and not at the height of the cylinder.
Reply With QuoteSimilar Threads
-
sos, relieves en artcam 2008
By melba in forum ArtCam ProReplies: 0Last Post: 09-02-2014, 11:49 PM -
Need help on artcam pro 2008 version.
By M.Abid in forum ArtCam ProReplies: 0Last Post: 03-21-2014, 10:37 AM -
artcam 2010 examples to artcam 2008
By mishu28nmv in forum ArtCam ProReplies: 0Last Post: 06-15-2011, 06:27 PM -
Artcam 2008
By Vegabond in forum ArtCam ProReplies: 86Last Post: 06-22-2010, 02:25 AM
Tags for this Thread
Posting Permissions
