I am new to a shop with a well used Puma 2000SY. One of the issues is the driven tool mechanics making a lot of noise.
I am new to Doosan machines and wanted to ask a question before diving in. My plan is to remove the turret cover so I can inspect (and possibly remove) the tool drive. I don't have the service manual, just the parts manual. When I took the screws out - the cover plate does not want to come off. My best guess is that it is stuck and just needs a convincing hand - but I don't want to damage anything. The parts manual does not show anything out of the ordinary. Perhaps the O-rings are stuck?
Any advice is appreciated.
Attachment 407960