530,152 active members*
2,618 visitors online*
Register for free
Login
Results 1 to 7 of 7
  1. #1
    Registered
    Join Date
    Feb 2010
    Posts
    10

    Question voiern wr4040 laser cutter default settings

    Hi, I need a little help and wondered if someone could help me out, I recently bought a voiern wr4040 laser cutter equiped with a RDC6442G "Ruida" controller. The Machine was working great, until I messed up a few setting and had the bright idea to do a parameter reset, thinking it would put the setting back like they where when I got the machine, but instead it reseted all setting to default for the DC6442G. Now the machine doesn't go to home, goes reverse in the y axis and move super slow. Contacted the seller but still haven't answered me. Anyone got a similar machine and can get me the default setting ?

  2. #2
    Registered
    Join Date
    Feb 2010
    Posts
    10

    Re: voiern wr4040 laser cutter default settings

    Ok, I got some of the settings back by myself and can use the machine again, only problem is : the laser power seem a lot weaker then before, when I tested it using the pulse button I was making a hole in 3mm wood pratically instantly, now it doesn't make it trough even if i hold the pulse for a few seconds. tested with a cut i used to be able to make trough the same wood in one pass and now it doesn't even go halway when cutting. Did I somehow bust the laser some way or is there a setting I messed up ?

  3. #3

    Re: voiern wr4040 laser cutter default settings

    I have the exact same problem. Did you manage to fix it somehow?

  4. #4

    Re: voiern wr4040 laser cutter default settings

    sorry to jump on the thread but can i ask where you bought it from im looking to get the WER-6040 and looking to find a supplier rather than go direct to china.
    cheers in advance.

  5. #5
    Registered
    Join Date
    Feb 2010
    Posts
    10

    Re: voiern wr4040 laser cutter default settings

    Quote Originally Posted by carlalvey View Post
    sorry to jump on the thread but can i ask where you bought it from im looking to get the WER-6040 and looking to find a supplier rather than go direct to china.
    cheers in advance.
    Can't really help you there as buying it directly from china is what I did back then. I looked at buying it from a reseller closer to home, but that more then doubled the price of the machine !

  6. #6

    Join Date
    Oct 2020
    Posts
    1
    Quote Originally Posted by mekanofreak View Post
    Ok, I got some of the settings back by myself and can use the machine again, only problem is : the laser power seem a lot weaker then before, when I tested it using the pulse button I was making a hole in 3mm wood pratically instantly, now it doesn't make it trough even if i hold the pulse for a few seconds. tested with a cut i used to be able to make trough the same wood in one pass and now it doesn't even go halway when cutting. Did I somehow bust the laser some way or is there a setting I messed up ?
    Hi i am having the same problem, can you share the settings?

  7. #7
    Registered
    Join Date
    Feb 2010
    Posts
    10

    Re: voiern wr4040 laser cutter default settings

    Quote Originally Posted by H120 View Post
    Hi i am having the same problem, can you share the settings?
    Well, My laser is not functional at the moment. I just moved into a new house and had no time to set it up, but I will either try to find the file I got the parameters from, or I will try to plug it in and get the config directly from it if you can wait a day or two.

Similar Threads

  1. VOIERN LASER CUTTER
    By hagus667 in forum General Laser Engraving / Cutting Machine Discussion
    Replies: 4
    Last Post: 02-22-2019, 07:08 PM
  2. Replies: 0
    Last Post: 01-12-2016, 04:08 PM
  3. overiding default settings
    By Pete M in forum Surfcam
    Replies: 2
    Last Post: 10-21-2012, 04:48 PM
  4. Preferences / settings default
    By DIFF OVER in forum BobCad-Cam
    Replies: 3
    Last Post: 09-06-2010, 09:26 PM
  5. Mastercam 9.1 default settings
    By Fatty in forum Mastercam
    Replies: 2
    Last Post: 06-29-2006, 05:04 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •